500mW WSPR

I said to myself, when I started this blog, that i wasn't going to start posting WSPR (or PSKR) maps showing how well I'm doing. So I'm not going to post the map, or anything. For one thing, it's probably not very good in comparison to many

I am running a pretty minimal setup here. The 817 is on 500mW, as low as it will go without gadgetry. The "antenna" is a random piece of wire of unknown length I found coiled up in the garage. The only concession I made recently was to lift the wire out of the gutter and position it in the air, with the help of a pole at the far end. I'm running this sophisticated piece of wizardry through an Elecraft T1 automatic ATU. There is no balun. The other half is connected to an earth stake, part of the more sophisticated end of the shack. If you ask any radio-aware friends how good this setup would be for DX, I think they'd probably choke with laughter

So, it's been running since about 8AM this morning. I have heard VE3KYK (5400km), VA3ZLT (5500 km) and UT7GH (2600km). And I'm hearing AG0T at 6300km

But I award myself the DX prize for a two-way WSPR with K5CGM (7100 km, in Jenks, OK). Shame they can't be QSLd....

20 metres WSPR

I left WSPR running on 20 metres whilst flitting in and out of the shack today. It's been on for about 6 hours, and this is a cumulative plot.

Running 2.5 watts out of the ft-817 to what is probably the world's worst antenna - a piece of wire running along some guttering about 2.5m up. With an earth, admittedly. The Elecraft T1 tunes it easily, but I am astonished at how well the 2.5W has got out. It turns out, i think, to be a better TX than RX antenna - a number of these stations can hear me, and only a few are heard by me but don't hear me.

By far the best DX here is RA0SX, who hears me but I can't hear him.

So why do we use such high power? I think there's an element of beat the competition. And, of course, nearly every mode will be much less efficient than WSPR.

WSPR on 40 metres

A half an hour this afternoon, and the arrival of an Elecraft T1 (portable automatic ATU) prompted a little play - I threw a piece of wire out of the shack, over a drainpipe, connected the other half to a metal washing line post, connected up the 817, dropped it onto 40m, tuned it (4 seconds) and started up WSPR.

Running about 5W for the moment, the only mistake I made was to forget to set the mode to DIG (Yaesu rigs only take the audio input from the rear connector in this mode - it you're in USB the input comes from the MIC)

Quite pleasing after a few minutes to see a bit of "DX" arriving. The plot above is after about 15 minutes of operation this afternoon. The 10m plot at G4ILO looks distinctly tastier...:-(

The T1 tunes very quickly, quietly and efficiently. It's a lot less trouble than my old ZM3 Z-Match, which worked well, but I was always suspicious of losses, particularly above 18 megs. To tune, one presses a button for a bit, then transmits - there's a visual indication of SWR on the top. Next time round (because I bought the swanky 817 lead) as you change bands a light flashes to say it's restored the last set of settings. It uses no power once it's latched.

I had to get it from qrpproject.de in Germany. I've dealt with them before - no import duty, pretty quick despatch. I couldn't find a UK dealer with them- so the hobby is *that* bad then?

I toyed with making one, but the prospect of winding coils threw me into a fit of buy-it-assembled. The other fear I have is of surface mount stuff. I have done ONE SMT before - the k1el keyer, IIRC. It wasn't that bad, but I remember getting into a sweat beforehand.